Galaxy s10 motherboard

Galaxy s10 motherboard DEFAULT

2 Bad Designs for Samsung Galaxy S10 Series Phone Repair

Home » NEWS » 2 Bad Designs for Samsung Galaxy S10 Series Phone Repair

Samsung released its flagship smartphone on February 20, this year, they launched 4 models of devices, S10e, S10, S10 Plus, and S10 5G. The designs of S10 have much difference from the previous model Samsung Galaxy S9. According to some Samsung Galaxy S10 teardown, and test videos on YouTube, we found that the S10 series of mobile phones are designed to become more irreparable. And the iFixit only give 3 out of 10 in terms of repairability for them. Here we collected 2 bad designs of the Samsung Galaxy S10.

 

Samsung Galaxy S10 Charging Port is unavailable to change


We charge the phone almost every day, so the charging port may be damaged during the plugging and unplugging process.

 

According to JerryRigEverything YouTube teardown video, the Samsung Galaxy S10 charging port is fixed on the motherboard. This is not the same as the previous model Galaxy S9. In before, if the charging port, the microphone is broken, we just buy a new Samsung Galaxy S9 charging port replacement online and replace it. But now, for Samsung Galaxy S10, we should replace the whole motherboard. There is no doubt that this will cost us a lot of money. So take care of your charging port.

 

Samsung Galaxy S10 motherboard with chargingport

 

Almost irreparable ultrasonic fingerprint


Unlike other under-screen fingerprint mobile phones, the Samsung S10 uses an ultrasonic fingerprint sensor. When the fingerprint sensor under the screen not working, we usually change a new replacement. But when JerryRigEverything tries to remove the ultrasonic fingerprint sensor, he only removed the flex cable. He said that the ultrasonic fingerprint sensor is difficult to remove, and the final result is that the Samsung Galaxy S10 screen black.

 

Samsung Galaxy S10 fingerprint cable

 

If you want to replace the fingerprint sensor for Samsung Galaxy S10, it has a big risk to damage the screen and you have to cost much money to replace the Samsung Galaxy S10 screen replacement.

 

PS: The ultrasonic fingerprint will not work if the front screen glass is broken on the identification area.

 

Take care of your Samsung Galaxy S10 phone or you will cost a lot of money to repair it.

 

ETrade Supply offers cell phone repair parts online, you can get Samsung Galaxy S10 parts here:

 

  1. For Samsung Galaxy S10e Parts: https://www.etradesupply.com/samsung/samsung-galaxy-s10e.html
  2. For Samsung Galaxy S10 Parts: https://www.etradesupply.com/samsung/samsung-galaxy-s10.html
  3. For Samsung Galaxy S10+ Parts: https://www.etradesupply.com/samsung/samsung-galaxy-s10-plus.html

 

Samsung Galaxy S10 Tear down video from JerryRigEverything:

 

 

(Video and image source from JerryRigEverything)

Sours: https://www.etradesupply.com/blog/2-bad-designs-samsung-galaxy-s10-series-phone-repair/

Samsung Galaxy S10 Motherboard Replacement

  • Insert a SIM card eject tool, SIM eject bit, or a straightened paperclip into the hole on the SIM tray, located at the top edge of the phone next to the plastic antenna band.If you inserted the tool into the other hole, don't worry—the microphone and the ingress seal are mounted out of harm's way.Press firmly to eject the tray.
    • Insert a SIM card eject tool, SIM eject bit, or a straightened paperclip into the hole on the SIM tray, located at the top edge of the phone next to the plastic antenna band.

    • If you inserted the tool into the other hole, don't worry—the microphone and the ingress seal are mounted out of harm's way.

    • Press firmly to eject the tray.

    • Remove the SIM card tray.

    • When reinserting the SIM card, ensure that it is in the proper orientation relative to the tray.

    Edit

  • Unplug and power off your phone before you begin.Heat an iOpener and apply it to the back cover's right edge for two minutes.A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.
    • Unplug and power off your phone before you begin.

    • Heat an iOpener and apply it to the back cover's right edge for two minutes.

    • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.

    • As you wait, take a look at the image of the removed back cover and take note of where the adhesive is located.

    Edit

  • Rest the heated right edge of the phone on something that is about  0.5 inches (13 mm) thick. This angles the phone for the opening tool.Brace the left edge of the phone with your fingers so that the phone won't slide. Pull on the suction cup with firm pressure.Press the edge of an opening tool into the seam between the back cover and the frame.
    • Rest the heated right edge of the phone on something that is about 0.5 inches (13 mm) thick. This angles the phone for the opening tool.

    • Brace the left edge of the phone with your fingers so that the phone won't slide. Pull on the suction cup with firm pressure.

    • Press the edge of an opening tool into the seam between the back cover and the frame.

    • With the opening tool in place in the seam, slide it back and forth along the seam to loosen the back cover.

    Edit

  • Heat an iOpener and apply it to the same edge of the phone for two minutes.Apply a suction cup to the back of the phone, as close to the center of the right edge as possible (where the adhesive is narrowest).Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.
    • Heat an iOpener and apply it to the same edge of the phone for two minutes.

    • Apply a suction cup to the back of the phone, as close to the center of the right edge as possible (where the adhesive is narrowest).

    • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

    • Insert the point of an opening pick into the gap.

    • Due to tight tolerances, this may take multiple attempts.

    • If you are having trouble creating a gap, your best bet is to apply more heat to the edge and try the previous step again.

    • You can try applying a few drops of high concentration (over 90%) isopropyl alcohol into the seam to help loosen the adhesive.

    • Do not apply excessive force with the pick, or you will risk cracking the back cover glass.

    Edit

  • Slide the opening pick along the edge of the phone, slicing through the adhesive.Do not attempt to slice the adhesive holding the corners down before applying heat. If you do, you may crack the back cover.Leave a pick in the seam to prevent the adhesive from re-sealing.
    • Slide the opening pick along the edge of the phone, slicing through the adhesive.

    • Do not attempt to slice the adhesive holding the corners down before applying heat. If you do, you may crack the back cover.

    • Leave a pick in the seam to prevent the adhesive from re-sealing.

    Edit

  • Apply a heated iOpener to the bottom edge of the phone for two minutes.Insert an opening pick into the right edge near the bottom right corner.
    • Apply a heated iOpener to the bottom edge of the phone for two minutes.

    • Insert an opening pick into the right edge near the bottom right corner.

    • Carefully slide the pick around the corner. Continue cutting along the bottom edge and around the bottom left corner.

    • If the cutting feels difficult, re-apply heat to the edge before continuing.

    • Leave an opening pick in the seam to prevent the adhesive from re-sealing.

    Edit

  • Edit

  • Once you have sliced around the phone, twist an opening pick in one of the edges to help separate the back cover from the frame.Lift the back cover slowly. Use opening picks to slice any remaining adhesive.Remove the back cover.
    • Once you have sliced around the phone, twist an opening pick in one of the edges to help separate the back cover from the frame.

    • Lift the back cover slowly. Use opening picks to slice any remaining adhesive.

    • Remove the back cover.

    • During reassembly, this is a good point to power on your phone and test all functions before you seal the back cover in place. Be sure to power your phone back down completely before you continue working.

    • Follow this guide to reinstall the back cover, transfer and install the camera bezel, and replace the adhesive.

    • If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it.

    Edit

  • The midframe is still held in place by a few plastic clips around the edge.Insert the point of a spudger into the notch on the right edge of the midframe, near the volume up button.
    • The midframe is still held in place by a few plastic clips around the edge.

    • Insert the point of a spudger into the notch on the right edge of the midframe, near the volume up button.

    • Pry up to loosen the midframe from the phone.

    Edit

  • Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera.Pry upwards to disconnect the connector from its socket.When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.
    • Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera.

    • Pry upwards to disconnect the connector from its socket.

    • When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.

    • Gently push the battery's flex cable away from the motherboard socket to prevent accidental contact.

    Edit

  • Sours: https://www.ifixit.com/Guide/Samsung+Galaxy+S10+Motherboard+Replacement/121821
    1. Jhs store
    2. Weather sunset beach
    3. Amazon basic shelving
    4. Crf125f review
    5. Timberland boots discount

    Repair guide : Rear Camera and Motherboard Galaxy S10

    You can no longer feed your Instagram account since the camera of your Galaxy S10 is in his head? The photo quality has deteriorated significantly and you can not focus anymore? All your photos are blurry and you can not even film anything anymore? An error message appears when opening the photo app? In short, your rear camera Galaxy S10 is really a concern! You can count on SOSav to help you! Likewise if your motherboard Galaxy S10 is to change since it is the same movements during disassembly. Only the final piece is different to change (rear camera or motherboard). Whether the motherboard is HS or it needs deoxidation, we explain how to disassemble your S10 in this tutorial.

    Our technicians have realized this repair guide illustrated and commented to accompany you throughout the maneuver. Each step is detailed to show you that changing your Galaxy S10 rear camera is not that complicated. And that you can disassemble the motherboard to clean it in case of falling in the water. Repairing your S10 yourself is a real economy. This will be up to three times cheaper on average, compared to the intervention of a professional.

    We advise you to simply make a backup of your data before changing your Galaxy S10 camera as a precaution. And if you need to replace the motherboard with a reconditioned part, you must make a backup because all data will be lost after change.


    Symptoms:

    • Poor photo quality
    • Error message when opening the photo app
    • Black image
    • Can not record a video
    • Major malfunctions of the Oxidation motherboard
    Some advice before you startSours: https://www.sosav.com/guides/mobiles/samsung/galaxy-s10/camera-back-card-mother/
    Samsung s10 plus no power by half short motherboard how to solve step by step solution

    Your Galaxy S10 has suffered water damage?

    In this manual we will show you how to remove the mainboard of your Samsung S10 to dry it on your own.

    Since the fragile, firmly adhered glass back cover must be removed first to remove the mainboard, we have classified this repair as difficult.

    Good luck with the removal of your mainboard! If our instructions helped you, we would be happy about a positive rating.

    Required tools

    • Hard Plastic Picks

      Hard Plastic Picks

      You need a flat but stable tool such as a pick to pry out parts that are glued in place.

      €3.00 at the iDoc store
    • Heat gun

      Heat gun

      You can use a heat gun to heat parts that are glued on so they’re easier to remove. In most cases, you can also use a hairdryer.

      from €14.47 on Amazon
    • For storing screws

      For storing screws

      We recommend storing your screws so you don’t mix up the various screws and small parts.

      €8.00 at the iDoc store
    • iFlex opening tool

      iFlex opening tool

      Opening your smartphone can be a very delicate operation, especially if the glue is very persistent. The blade of the flexible but sturdy iFlex measures just 0.15 mm, so it fits in even the smallest gaps, such as between the screen and the frame. The practical iFlex is made of stainless steel and sits comfortably in the hand. This makes it the perfect assistant for every smartphone repair.

      €9.00 at the iDoc store
    • iPlastix

      iPlastix

      Do you want to open your smartphone or lever out large parts like the battery? Then the iPlastix with its large blade will help you. The practical assistant is made of flexible, especially sturdy plastic and lies comfortably in the hand. Thanks to its design, you can even get into smaller gaps, for example to lift the screen or to prevent it from sticking together again.

      €9.00 at the iDoc store
    • Tweezers

      Tweezers

      We recommend using tweezers to remove screws and various small parts from your device.

      €10.00 at the iDoc store
    • Plastic prying tool

      Plastic prying tool

      You need a flat plastic prying tool to disconnect the various plugs and connectors.

      €3.00 at the iDoc store
    • Phillips PH00 screwdriver

    Required replacement part

    Show all replacement parts for the Galaxy S10 
    Sours: https://www.idoc.eu/guides/en/samsung/galaxy-s10/removing-the-mainboard/746

    Motherboard galaxy s10

    .

    Samsung S10+ Glass Repair - S10+ Glass Replacement

    .

    You will also be interested:

    .



    158 159 160 161 162